RoadRadar

Two-gate speed timer using your iPhone camera.
Tap Start, then Gates to place lines A and B on two landmarks a known distance apart.
--km/h
 
OFF



Drag the A and B lines onto two fixed landmarks (poles, driveways) at a measured distance apart, then drag the dashed band edges to cover the traffic lane. The bars at the top of each line show live motion.

Settings

Site

What gets saved

Detection

Cloud backup

Storage

…

How it works

RoadRadar is a two-gate timer. It times a vehicle between gate A and gate B and works out speed = distance ÷ time.

Categories: OK at or under the limit · TOL within tolerance · OVER speeding · EXCESS excessive. "Speeders" means OVER and EXCESS.

Sessions: a session starts when you first Arm and runs until you tap End session in the Log. Each session gets its own stats and its own CSV export.

Accuracy: at 30 fps over 20 m, expect about ±2 to 3 km/h at 60 km/h. A longer gate distance is more accurate. Check your setup with a drive-through at a known speed.

Readings are estimates only. They are not calibrated or certified, so they aren't legal proof of speeding.

Sessions

To read a plate: drag a box around it, then tap Read plate in box.
No photo for this reading (data only).